We’re back for 2016! Our next blog comes from Adrian at HowtoLaser.com,
Constant Speed Test Pattern
Firstly, it is important that you download the files needed, they can be found HERE.
Once the files have been downloaded, extract the zip file in a folder or on the desktop.
Next we will need to open JobControl and import the Material templates.
By clicking “CTRL + M” after opening JobControl, the material database window will pop up. Navigating down to the “Options” icon, press the “Import from file” option.
Next, we have to navigate to the folder where we extracted the .zip file and find the file called “Constant Speed 25%”. This files, file type is .XML. Once you have clicked the file, press “Open”. You will later need to repeat this step for all the other .XML files (50%, 75% and 100%).
The next window you will be greeted with is the “Material Import” window. When presented with this window, please click “Import Materials and create copy on equal material names”. By clicking this option, it will prevent overwriting a material file with the same name.
As you can see, once imported, the new material will be stored under the material group “Standard” in a material called “Constant Speed 25%”.
NOTE: As you can see in the image above the power and speed settings increase at a rate of 6.25% per colour. Each colour will have a constant speed of 25% and only the power of the laser will increase. You can skip certain colours, if you think that they will damage the material you are testing. For Example 100 power, 25 speed will put the most power into the material which could set fire to it. Please be aware, that if the material under test is flammable or can be easily damaged due to high heat, please skip this engraving colour.
Now that we have the material in the material database, please restart JobControl to save the changes.
Once JobControl has been restarted, the material will now be stored in the material database. These steps will need to be repeated for the other 3 material templates. Please repeat this step for the 50%, 75% and 100% speed test patterns.
Now we will learn how to use the Constant Speed Test Pattern.
When you open the “Constant Speed (P 6.25 – 100)” file, you will be greeted with this view.
Simply navigate up to “File” and press “Print”
You will then be greeted with the “Print Properties” window. Please click the “Preferences…” button to set up the printer driver.
The printer driver settings should look like the image above.
NOTE: Please take care to make sure the correct material is selected in the “Material Settings” section. This should have the correct Constant Speed material selected. Constant Speed 25% will run the laser with 25% speed, 50% for 50 etc..
If everything is done correctly, you should see the test pattern in JobControl with each colour selected. Again I must stress, if your material under test is flammable or can be easily damaged due to high heat, please skip any engraving colour that might cause damage to the material.
An operator must be supervising the material testing at all times. By using these test files, you as the operator of the laser, take full responsibility for any damages caused by the misuse of these files.
That’s it for now
Catch ya next time!